Intake tubes custom made for our billet intake manifolds. Typically used on our billet heads but can be used for other applications. Allows the intake to be adapted to the carburetor of your choice. The angled tubes can be turned and the length can be cut to adjust for both engine angle and location. They can even be installed backwards to angle the carb more towards the front of the vehicle.
These are custom molded to our design out of high temperature silicone with extra wall thickness and smooth curves. Designed to flow extremely well and suppress vibration going to the carburetor at the same time. Greatly reduces overflow out of the carb bowl drain on float carbs.
1.25" ID 30-Degree ~4.5" Long (Std on our SBH intake for std valve head for 28mm carbs or use with tilly adaptor)
1.25" ID 45-Degree ~4.5" Long (More angle than std for 28mm carbs or use with tilly adaptor)
1.375" ID 30deg ~4.5" Long ( Std for our Large Valve SBH intake, this is required for any SBH big valve intake and will fit 28-32mm carburetors)
Straight 1.25" x ~1.75" (fits up to 28mm flatslides but mainly used for pumper carbs)
Straight 1.375" x 1.75" (fits up 33mm carbs typically)